In today’s article, we will discuss the important insulation of the wall, which is a key element in construction that affects the energy efficiency of the building and the comfort of its users.
A wall lattice, i.e. a wooden beam with a large cross-section, is an integral structural element of many buildings. Its main role is to transfer loads from the roof to the walls and other structural elements of the building. It is responsible for the stability of the roof and its integrity. However, if it is not properly insulated, it can become a powerful thermal bridge, leading to heat loss and moisture problems.
The role of Murłata in the Construction of the Building
The wall panel plays a key role as an intermediate element between the roof and the external walls of the building. It is attached with screws anchored in the concrete of the ring, and the rafters of the pitched roof truss rest on it. It is the masonry that transfers loads from the roof to the walls and other structural elements, which makes it extremely important for the stability of the entire structure.
The Importance of Murłata Warming
The most important aspect that should be taken into account when building and insulating a wall is the prevention of thermal bridges. Thermal bridges are areas in a building where thermal insulation is ineffective or incomplete. If the wall is not properly insulated, it may become a source of heat loss from the building, leading to increased heating costs and uncomfortable conditions inside the rooms.
Insulating Murłata – Step By Step
There are two main methods of insulating a wall: from the outside and from the inside. The choice depends on the specificity of the building and the stage of construction.
Insulating the wall panel from the outside: In this method, the thermal insulation should extend beyond the end of the load-bearing wall to the roof membrane to thoroughly isolate the wall panel from the cold. This is a more complicated procedure, but provides excellent thermal insulation.
Insulation of the walls from the inside: Thermal insulation should reach up to the polystyrene boards and remain continuous. The insulation of the walls with polystyrene and the mineral wool of the roof must overlap.
It is also important to fill all the nooks and crannies of the space behind the wall with thermal insulation material to avoid thermal bridges. Particular attention should be paid to the nooks and crannies at the junction of the beam and the sloping roof surface. It is worth consulting with professionals to ensure proper insulation of the walls.
Insulating the walls is a key step in the construction process, which affects the energy efficiency of the building and the comfort of its inhabitants. Avoiding thermal bridges and proper thermal insulation of the masonry are necessary to ensure effective and economic use of the building. It is always worth consulting about proper insulation of the walls and protection against heat loss and moisture. Thanks to this, it is possible to achieve better energy efficiency of the building and more comfortable living conditions.