Moisture in a building is a problem that can lead to serious structural damage and health hazards. In this article, we will discuss building damp, its causes, drying methods, and the importance of solid insulation.
One of the main causes of building dampness is the lack of adequate waterproofing of the foundations or basement. In the case of older buildings, the insulation may have been poorly made or simply worn out over the years. Additionally, changes in atmospheric conditions or in the vicinity of the building, such as a rise in groundwater levels, may affect the humidity level in the building.
Moisture in the building – causes
Another potential source of moisture is the lack of adequate thermal insulation in external walls. The main partitions may be too cold or thermal bridges may occur, which promotes condensation. This leads to damp walls and potential mold problems. Another factor that causes building moisture is an ineffective ventilation system. Water in the air from kitchens, bathrooms and breathing settles in the partitions if not ventilated properly. An incorrect ventilation system or too tight structures may lead to increased humidity in the building. Water can also enter the building through leaks in the plumbing. This can cause leaks that lead to serious damage.
Methods of drying the building
Initiating remedial actions in the event of building dampness requires a thorough analysis of the problem. It is important to identify the source of the moisture and assess the extent of the damage. For this purpose, it is worth using the help of an expert engineer who will assess the condition of the foundations and indicate appropriate repair methods. Engineer will check ventilation the effectiveness of the building’s ventilation system and recommend possible corrections. The geotechnician will carefully analyze the soil and water conditions around the building and advise on how to improve the situation. The geotechnician will carefully analyze the soil and water conditions around the building and advise on how to improve the situation. It is also worth consulting companies that specialize in removing moisture problems in buildings. They offer not only consultations and tests, but also construction services, helping to effectively remove moisture from the building and prevent further damage.
Summary
Building damp is a serious problem that requires attention and remedial action. The causes of dampness can be various, but it is always worth starting with a thorough analysis of the situation. Thanks to cooperation with experts and appropriately selected drying methods, comfort and safety can be restored to the building. Thermal insulation, proper ventilation system and maintenance of the water and sewage system are key elements in preventing building dampness.
